Navien tankless water heater with its venting and water lines

Tankless Repair and Tune-Ups

Tankless Water Heater Repair & Maintenance in Lenox, MI

When a tankless unit delivers lukewarm water, cuts out during a shower, or shows an error code, the cause needs to be found before any part is replaced.

Our Repair Approach

A Tankless Repair Contractor That Confirms the Cause First

Navien tankless water heater installed on a framed wall

Degree Heating and Cooling is a locally owned and operated company in Lenox, Michigan, and we repair and maintain Navien tankless water heaters for homes in Lenox and the communities around it. Our technicians check the gas supply, ignition, water flow, and temperature settings, then explain what they find in plain language.

  • Local Accountability for Every Repair Visit

    A tankless unit heats the water your household uses every day, so the people who diagnose it should be easy to reach after the visit. Degree Heating and Cooling is locally owned and operated, and our technicians work in the communities we serve. The team that tests your unit is the team you can call with follow-up questions.

  • BBB Accredited Standing

    We are BBB Accredited, which gives you an independent public reference before you approve any work on your water heater. Repair decisions are easier when you can verify a company's standing for yourself. You can read more about our background on our about page before you schedule a visit.

  • Navien Service Knowledge

    We service Navien tankless water heaters, and we review the gas input, water flow, venting, and error codes that matter most for these units. We bring that focus to every visit. If your unit is a different make, tell us when you contact us and we will explain whether we can support it.

  • Error Codes Read Alongside Symptoms

    A display code names a fault category, but the same code can have more than one cause. We read the code together with the symptoms you describe, the time it appeared, and what the unit was doing at the time. Then we test the components that could produce it, so each step narrows the cause before we recommend work.

  • Parts Replaced Only When Tests Support Them

    We replace only the components that the readings confirm as faulty. When a unit can return to dependable operation through cleaning, adjustment, or a targeted repair, we explain that option first. If a major component is failing, we describe what the failure means and outline the choices available to you.

  • Test Readings in Plain Language

    Before any repair is approved, we walk you through the readings and what they indicate about your unit. Our goal is for you to understand the cause, the fix, and the alternatives without needing technical training. Send us your questions before you schedule a visit.

Request a Repair Visit

Tell Us What Your Tankless Unit Is Doing

Use the contact form to describe the symptoms you have noticed, such as lukewarm water, temperature swings, a unit that shuts off during use, or an error code on the display. Note when the problem appears and whether it happens at startup or during long hot water draws. Our technicians come to your home to test the unit, so there is nothing you need to bring to us. If you are still deciding between repair and replacement, compare our tankless installation options, read the tankless water heater overview, or review tank water heater service for a conventional tank.

Signs That Need Attention

Symptoms That Point Toward a Repair

  • Lukewarm Water While the Unit Is Running

    The unit lights and runs, yet the water never reaches the temperature you set. A weak gas supply, restricted water flow, a sensor reading the wrong value, or a setting that differs from the outlet temperature can each cause this. We measure the outlet temperature and the gas input before deciding which component is responsible.

  • Temperature That Swings During a Shower

    Water that runs hot, then cold, then hot again usually points to changes in flow, a sensor reading, or a unit that cycles as demand shifts. Mineral scale or a clogged inlet screen can restrict flow enough to cause the swings. We check the flow path and the temperature sensors before recommending any work.

  • An Error Code on the Display

    Codes point technicians toward a fault category, and a code that repeats or returns after a reset deserves a visit, because the cause has not been cleared. Write down the code and the day it appeared. That record helps us trace the fault and compare what we measure with what the unit reported.

  • Ignition Failures or Unexpected Shutdowns

    If the unit fails to fire, shuts down partway through use, or restarts several times in a row, the ignition sequence or a safety circuit may be interrupting operation. Gas supply pressure, the igniter, and the flame sensing components all play a part. We test each one in turn, so a repaired unit returns to steady operation.

  • Rumbling, Whistling, or Knocking From the Cabinet

    Sounds from the cabinet can come from mineral scale inside the heat exchanger, changes in water pressure, or a fan or component that is wearing. Each sound has a different cause, so we listen during operation and then inspect the parts it points toward. Describe the sound in detail when you contact us.

  • Reduced Output After Years of Use

    When a unit that once met your household's needs no longer delivers the same hot water, scale, worn components, or a drifting sensor may be responsible. Gradual changes are easy to miss at home, so a tune-up can reveal the cause and show you the readings. We will say plainly whether the unit can be restored or whether replacement deserves a conversation.

Repair and Tune-Up Services

Tankless Repairs and Tune-Ups We Perform

We cover the components that most often affect tankless performance, plus tune-up work.

  • Ignition and Igniter Service

    Weak igniters and dirty flame sensing components cause hesitant firing and repeated shutdowns. We test both and clean or replace them as the readings require. Ask About Ignition Service.

  • Gas Valve and Burner Checks

    Unsteady firing can trace to the gas valve, the burner components, or the supply pressure. We test the valve sequence and the burner response before recommending any change. Request a Gas Valve Check.

  • Water Flow Sensor and Inlet Screen Service

    Low flow can keep the unit from firing or cause temperature swings during use. We clean inlet screens, test the flow sensor, and confirm normal household flow. Discuss Flow Concerns.

  • Temperature Sensor Repairs

    Sensors that report the wrong temperature can make the unit heat too little or too much. We verify each reading against the measured outlet temperature and repair or replace the sensor when the readings call for it. Get Help With Temperature Problems.

  • Heat Exchanger Scale Cleaning

    Mineral scale narrows the water passages inside the heat exchanger and reduces output. We inspect for scale and clean where the findings call for it. Book a Scale Inspection.

  • Venting and Combustion Checks

    Venting and combustion air determine whether the unit burns cleanly and vents safely. We inspect the vent route, its terminations, and the required clearances, and we measure combustion where the unit allows. Schedule a Venting Review.

  • Pre-Season Tune-Ups and Maintenance Visits

    A tune-up cleans and inspects the components the unit depends on, so small wear receives attention before it becomes a breakdown. We record the readings for future comparison. Book a Tankless Tune-Up.

How We Diagnose

From Symptom to Verified Repair

A tankless repair depends on measurements taken in a set order. Each stage narrows the cause before any part is considered, and the safety and combustion checks come first.

  1. Record the Symptoms and the Unit's History

    Every visit begins with the history, because timing and pattern often point toward the fault.

    • Note when the problem began and whether it happens at startup, during long draws, or both
    • Record the error codes on the display and the day each one appeared
    • Ask about recent gas work, water changes, or power interruptions in the home
    • Identify the make, model, and approximate age of the unit when that information is available
    • Confirm which fixtures and appliances draw hot water from the unit
    • Ask when the unit was last serviced and whether any work was done on it since
  2. Check Ignition, Gas Supply, and Safety Circuits

    Safety circuits come first, so we confirm the gas path and ignition before testing anything else.

    • Measure the gas supply pressure to the unit and compare it with the unit's requirements
    • Test the igniter and flame sensing components for correct operation
    • Confirm the safety shutoff and any pressure or temperature switches respond correctly
    • Check the gas valve sequence during a live firing cycle
    • Review whether other gas appliances draw from the same line, and recommend gas piping services when the supply needs work
  3. Test Water Flow, Temperature, and Scale Buildup

    Water-side components decide whether the unit can heat as designed, so we test them under real demand.

    • Measure water flow through the unit and compare it with the level the unit needs to fire
    • Inspect the inlet screen and filter for debris or restriction
    • Compare outlet temperature with the setting at several flow rates
    • Check the heat exchanger for mineral scale and note how much buildup is present
    • Confirm the temperature sensors report readings that match the measured outlet temperature
  4. Explain the Fix and Get Your Approval First

    We present findings before any part is ordered or any repair begins.

    • Describe what each finding means for the unit's operation and safety
    • Explain each repair option, what it corrects, and what it will not address
    • Replace only the failed components that the test results confirm
    • Clean scale, screens, and sensors when cleaning restores proper operation
    • Begin work only after you have reviewed the plan and agreed to it
  5. Confirm Performance and Document the Visit

    The visit ends with measurements that show the unit is operating as it should.

    • Run the unit through a full heating cycle at normal and reduced flow, and record the outlet temperatures
    • Confirm ignition, burner operation, and safety responses after the repair
    • Provide a written summary of the findings, the work performed, and the readings
    • Provide manufacturer warranty paperwork for any replaced part where the manufacturer offers it
    • Recommend whether a tune-up would help keep the unit steady before the next busy season

Common Questions

Tankless Repair and Tune-Up Answers

Our Services

Complete HVAC Services in Lenox and Nearby Communities

From the first warm day of summer to the coldest stretch of a Michigan winter, your home depends on equipment that works. As a full-service HVAC contractor, we install, repair, and maintain the systems that heat, cool, and supply hot water to homes across Lenox — plus the generators that keep everything running when the power goes out.

Furnace with an air cleaner and humidifier installed on the ductwork

Indoor Air Quality

Filtration, air purification, ventilation, UV treatment, and humidity control.

Customer Reviews

Read Reviews on Google (opens in a new tab)

What Our Customers Say

Our neighbors' feedback means everything to us. Read what homeowners across the area have to say about working with Degree Heating and Cooling.

Our Service Area

Tankless Repair Coverage Around Lenox

We are based in Lenox and repair tankless water heaters for homeowners in the communities below. Our service area overview explains our coverage, and if your town is not listed, contact our team to ask.

Don't See Your Location?

Don't see your town listed? We also help homeowners in neighboring communities around Lenox. Give us a call and we'll let you know if we can reach you.

Map of the service area around Lenox, Michigan, with pins on Lenox, New Haven, Macomb, Chesterfield, New Baltimore and Ira
  • Honest, Transparent Service
  • BBB Accredited
  • Locally Owned & Operated
  • AirEase & Samsung Systems
  • Flexible HVAC Financing

Next Steps

Reach a Lenox Tankless Repair Company

A tankless unit that is losing hot water or showing a fault deserves a clear diagnosis before anyone changes a part. We want you to understand the cause, the repair, and the alternatives before you approve any work. Homeowners in Lenox and nearby towns deserve straightforward answers about what their unit is doing, and our locally owned business and BBB Accreditation shape how we explain each finding. A careful diagnosis also protects your investment, because a correct repair keeps a sound unit working the way it was designed to. Our technicians review the readings with you in plain language, so the choice is clear before anything changes.

If the unit needs more than a repair, our financing options can help you plan a replacement over time with our partners Hearth, Service Finance, and GoodLeap, and each partner has its own terms to review. Each partner runs its own application process, so review those terms directly before you decide. Once the unit is running well, our maintenance plans offer scheduled care that supports steady performance between visits, and you can ask how the plan fits your unit at any point.

Tell us about your water heater, the symptoms you are seeing, and when they appear, and our team will confirm the next step with you. We serve Lenox and the communities around it, and nothing is scheduled until your questions have been answered. A clear picture of the problem helps us plan the visit well. You stay in control of every decision, from a simple adjustment to a larger repair, and you can ask follow-up questions after the visit. We want every question answered before you decide, and we will take the time a clear decision requires.

Navien tankless water heater with its copper water lines
Call Schedule Service