Technician servicing the open control panel of an outdoor unit

Diagnose First, Repair Second

Heat Pump Repair & Maintenance in Lenox, MI

A heat pump that stops heating in winter or stops cooling in summer needs an accurate diagnosis before anyone replaces a part.

Our Repair Approach

Why Lenox Heat Pump Owners Rely on Our Visits

AirEase outdoor unit on a concrete pad beside a brick home

Degree Heating and Cooling is a locally owned and operated company based in Lenox, Michigan, and we repair and maintain ducted heat pumps for homes in Lenox and the communities around it. Our technicians check the outdoor unit, the defrost controls, the refrigerant circuit, and the indoor air handler, then explain what they found.

  • Local Accountability When a Heat Pump Fails

    A heat pump that stops working affects the comfort of the whole household, and you should be able to ask the people who repaired it about their work. Degree Heating and Cooling is locally owned and operated, so the technicians who diagnose your system serve the same community they live in. That accountability shows in how carefully we document each repair.

  • BBB Accreditation Open to Your Review

    We are BBB Accredited, which gives you an independent public reference before you approve any heat pump work. You do not have to rely on our word alone. Our company background explains how we operate, and you can review it before you schedule a visit.

  • Diagnosis Comes Before Any Replacement Part

    Heat pump symptoms often overlap, because a weak defrost sensor, a low refrigerant charge, and a failing reversing valve can all leave the system short of heat. We test each likely cause and rule out the others before recommending a part. You hear what the readings show and what they do not show.

  • Repairs Limited to What the Tests Confirm

    We replace only the components that our testing supports. When a targeted repair can return your heat pump to reliable operation, we say so plainly. When a major component is failing, we explain the risk and lay out your choices, including whether replacement makes more sense for your home.

  • Seasonal Tune-Ups Built Into Repair Visits

    A repair visit is a good time to check the parts that will matter next season. We can clean the coil, inspect the defrost controls, and confirm the thermostat settings while the system is open. If you want regular attention afterward, our maintenance plans describe the options.

  • Documentation for Future Service Decisions

    After the work, you receive a summary of the findings, the parts we replaced, and any manufacturer warranty paperwork that applies. A written record helps you compare future repair recommendations and decide when a replacement deserves a closer look. Send us your questions before you schedule.

Describe Your Symptoms

Send Us the Symptoms You Notice

Use the contact form to describe what your heat pump is doing, such as running constantly, building frost, cycling on and off, or leaving some rooms uneven. Note whether the problem appears in heating mode, cooling mode, or both, and whether the outdoor unit sounds different than usual. Our technicians come to your home to test the system, so there is nothing you need to bring with you. If you are still deciding between a repair and a new system, compare heat pump installation options, browse the heat pump services overview, or review central air conditioning repair for the cooling side of your home.

Early Warning Signs

How a Struggling Heat Pump Shows It

  • Heat Output Drops in Cold Weather

    A heat pump that cannot keep rooms warm during a cold snap may be losing capacity. A low refrigerant charge, a weak compressor, or a fault in the defrost controls can each reduce heat delivery, and backup heat may run more than usual to make up the difference. We measure the system's operation before deciding which cause is responsible.

  • Frost or Ice Building on the Outdoor Unit

    Some frost during winter is part of normal defrost operation, but heavy ice that persists is not. A failing defrost sensor, a stuck reversing valve, or restricted airflow can all ice over the outdoor coil, and that ice can damage the coil and strain the compressor. We check the defrost sequence and its sensors before recommending any repair.

  • Short Cycling or Repeated Shutdowns

    A heat pump that turns on and off every few minutes is not running the way it should. Short cycling can come from a safety or pressure control, a dirty filter, or a thermostat setting that does not match the equipment. We track the timing of each cycle first, because that pattern points to where we begin.

  • Backup Heat Running Most of the Time

    Auxiliary heat strips are designed to assist during the coldest weather, not to carry the home all winter. When backup heat runs most of the time, the heat pump may be underperforming, or the thermostat may be calling for it too early. We test the heat pump and the thermostat settings together so the root cause is clear.

  • Unusual Noises From the Outdoor Unit

    Clicking, hissing, grinding, or a rattling fan can each point to a different component. A loose fan blade, a worn fan motor, or a failing contactor can all produce distinct sounds, and hissing can suggest a refrigerant leak. We inspect the fan, motor, contactor, and refrigerant lines before advising a repair.

  • Water Dripping Near the Indoor Air Handler

    Water near the indoor unit usually means the condensate drain is blocked, the drain pan has cracked, or the indoor coil is freezing during operation. Standing water can damage ceilings and flooring over time. We clear and inspect the drain path, check the coil and airflow, and confirm the pan is intact before the system returns to service.

Heat Pump Repair Services

Heat Pump Components We Repair and Tune Up

  • Reversing Valve Service

    The reversing valve switches the heat pump between heating and cooling, and a sticking valve can leave rooms too hot or too cold. We test its operation and the controls that drive it. Ask About Reversing Valve Service.

  • Defrost Control and Sensor Testing

    Defrost controls decide when the outdoor coil clears its frost. We test the sensors and control board so the cycle runs only when it should. Discuss Defrost Concerns.

  • Refrigerant Charge Checks

    A charge that is too low or too high reduces output and strains the compressor. We measure pressures and inspect fittings before recommending any refrigerant work. Schedule a Refrigerant Check.

  • Compressor and Capacitor Testing

    Capacitors and compressors are common points of failure in outdoor units. We test electrical draw and starting behavior to learn whether either needs replacement. Request Compressor Testing.

  • Auxiliary Heat Strip Service

    Backup heat strips should run only when the heat pump needs help in very cold weather. We test each strip, its breaker, and the sequence that energizes it. Book Auxiliary Heat Testing.

  • Thermostat and Control Wiring Repairs

    Thermostat settings and low-voltage wiring must match the heat pump's controls. We verify both, then repair or replace what does not work. Get Help With Thermostat Issues.

  • Indoor Blower and Air Handler Service

    A failing blower motor or worn belt reduces airflow and can leave rooms uneven. We inspect the motor, capacitor, and air handler components, then clean or replace what the readings require. Review Blower Concerns.

  • Seasonal Tune-Ups for Heating and Cooling

    A tune-up cleans the coils, checks refrigerant operation, tests defrost controls, and inspects electrical connections before each season. Regular service helps catch wear early. Book a Seasonal Tune-Up.

How We Diagnose

From the First Symptom to a Verified Repair

Heat pump repairs depend on measurements taken in a set order. Each stage narrows the cause, and the readings guide every recommendation that follows.

  1. Review the Symptoms and System History

    Every repair starts with the history, because the timing of a problem often points toward its cause. We want to know how the system has behaved over the past season, in both heating and cooling.

    • Note whether the problem appears in heating mode, cooling mode, or both
    • Record when frost, noise, or cycling began and how often it occurs
    • Review thermostat settings, schedules, and any recent changes to the controls
    • Ask about past repairs, filter changes, and any work done by other technicians
    • Note the make and model of the outdoor unit and indoor air handler when that information is available
  2. Test the Outdoor Unit and Defrost Operation

    The outdoor unit does much of the heat pump's work, so we begin with its performance and its defrost controls. A system that clears its own frost reliably is far less likely to suffer a winter breakdown.

    • Inspect the outdoor coil for frost, debris, bent fins, and blockages
    • Check the fan, fan motor, and capacitor for proper operation
    • Test the defrost sensor, the defrost control board, and the reversing valve sequence
    • Confirm the contactor and electrical connections are sound and show no wear
    • Watch a defrost cycle run and confirm it clears the coil before the system returns to heating
  3. Measure Refrigerant Pressures and Charge

    Refrigerant problems are common causes of weak heating and cooling, so we measure operating pressures before deciding on a repair. These readings show whether the circuit is charged correctly and whether something is leaking.

    • Measure operating pressures in heating mode and in cooling mode
    • Compare the refrigerant charge against the manufacturer's specifications
    • Look for signs of leaks at fittings, service valves, and line set connections
    • Check the compressor's electrical draw and how it starts and runs
    • Explain what the readings show before any refrigerant work is recommended
  4. Inspect the Indoor Air Handler and Ductwork

    Indoor components can produce the same symptoms as an outdoor fault, so we test the air side of the system as well. Restricted airflow can make a healthy outdoor unit look like the source of the trouble.

    • Inspect the indoor coil, drain pan, and condensate drain for blockages or damage
    • Check the blower motor, its capacitor, and the airflow at the supply registers
    • Test the auxiliary heat strips and the control sequence that energizes them
    • Evaluate the filter, the return air path, and accessible ductwork for restrictions
    • Confirm the thermostat wiring matches the heat pump's control requirements
  5. Present Options, Complete Approved Work, and Document the Results

    We explain each option before any work begins, and we carry out only the repairs you approve. The visit ends with written records of what we tested and what changed.

    • Explain each repair option, what it corrects, and what it leaves unaddressed
    • Replace only the failed components that the test results confirm
    • Run the system through heating and cooling after the repair and record the readings
    • Provide a written summary of the findings, the work performed, and the readings
    • Provide manufacturer warranty paperwork for replaced parts where the manufacturer offers it
    • Recommend whether a seasonal tune-up would help before the next heating or cooling season

Repair Questions Answered

Common Questions About Heat Pump Repairs

Our Services

Complete HVAC Services in Lenox and Nearby Communities

From the first warm day of summer to the coldest stretch of a Michigan winter, your home depends on equipment that works. As a full-service HVAC contractor, we install, repair, and maintain the systems that heat, cool, and supply hot water to homes across Lenox — plus the generators that keep everything running when the power goes out.

Furnace with an air cleaner and humidifier installed on the ductwork

Indoor Air Quality

Filtration, air purification, ventilation, UV treatment, and humidity control.

Customer Reviews

Read Reviews on Google (opens in a new tab)

What Our Customers Say

Our neighbors' feedback means everything to us. Read what homeowners across the area have to say about working with Degree Heating and Cooling.

Where We Repair

Heat Pump Repair Across Lenox and Nearby Towns

We are based in Lenox and repair and maintain ducted heat pumps in the communities below. Our service area overview explains our full coverage, and each town has its own page with local details.

Don't See Your Location?

Don't see your town listed? We also help homeowners in neighboring communities around Lenox. Give us a call and we'll let you know if we can reach you.

Map of the service area around Lenox, Michigan, with pins on Lenox, New Haven, Macomb, Chesterfield, New Baltimore and Ira
  • Honest, Transparent Service
  • BBB Accredited
  • Locally Owned & Operated
  • AirEase & Samsung Systems
  • Flexible HVAC Financing

Book a Visit

A Lenox Heat Pump Contractor for Repairs and Tune-Ups

A heat pump that is not performing well affects comfort, energy use, and the reliability of your home's heating and cooling. We want you to understand each finding before you approve any work, whether the answer is a targeted repair, a tune-up, or a longer conversation about replacement. Our locally owned business and BBB Accreditation shape how we handle every visit, and we aim for clear, honest answers at each step. You will know what we tested, what we found, and which options fit your home before anything is approved.

If a repair points toward replacement, our financing options can help you plan the investment over time with our partners Hearth, Service Finance, and GoodLeap. Each partner has its own application process and terms, so review them directly before you decide. Our team can explain how each option compares with the equipment you are considering, so the choice rests on your home and your budget. Homeowners who want steady attention for their comfort system can also look at a maintenance plan for scheduled care.

Tell us what your heat pump is doing, which rooms feel uneven, and any recent repairs, and our team will confirm the next step with you. We serve Lenox and the communities around it, and you are welcome to contact our team with questions about your repair or our coverage area. We would like you to leave each conversation with a clear picture of your options and the reasons behind them.

Once a visit is complete, the written summary and test readings give you a reference point for future service calls. That record makes it easier to compare recommendations over the life of the system, whether the next decision is a tune-up, a repair, or a replacement. We are glad to answer follow-up questions after the visit, so you can take time to think before deciding.

AirEase outdoor unit beside a brick home and a wooden deck
Call Schedule Service