Residential packaged heating and cooling unit on a pad beside a house

Single-Cabinet Comfort for Lenox Homes

Packaged System Installation in Lenox, MI

A packaged system places the heating and cooling components in one outdoor cabinet, and a successful installation depends on how that cabinet fits the home around it.

Our Approach

What Lenox Homes Gain From a Locally Owned Packaged System Company

Packaged heating and cooling unit with its top panel open for service

Degree Heating and Cooling is a locally owned and operated company based in Lenox, Michigan, and we install packaged residential systems for homeowners in Lenox and the communities nearby. Every project starts with a review of your home, the outdoor site, and the connections the cabinet will need. You receive plain-language recommendations before anything is scheduled.

  • A Local Team Accountable for the Result

    Degree Heating and Cooling is locally owned and operated, with our business based in Lenox. A packaged cabinet stays outside the home for many years, so the people who install it answer to the community they serve. That accountability shapes how we plan the site, set the cabinet, and follow up after startup. You can read more about our company background before you decide.

  • BBB Accredited Business Practices

    We are BBB Accredited, which gives you an independent public reference point before you commit to a packaged installation. Because a new system is a significant investment, we would rather you verify our standing than rely on our word alone. We welcome that check, and we are glad to answer questions about how we run each project.

  • Placement Reviewed Before the Cabinet Is Set

    Where a packaged cabinet sits affects airflow, drainage, service access, and how much work the connections require. We review the proposed pad or roof location with you so the spot you approve works for the home over the long term. The cabinet is not set until the location makes sense for the property.

  • Connections Planned as One Project

    A packaged installation brings the cabinet, ductwork, gas supply, and electrical service together in one plan. We scope those connections together so you see the full picture of the work rather than learning about add-ons after the crew arrives. A clear scope also makes it easier to compare proposals side by side.

  • Capacity Chosen for Winter and Summer

    One cabinet carries both heating and cooling, so the capacity we recommend must serve the home in every season. We base that recommendation on the layout of the home and the comfort goals of the people who live there, rather than copying the size of the equipment you have now. You will see how the recommendation fits both seasons before you decide.

  • Plain-Language Proposals You Can Compare

    Each recommendation explains what the installation includes, which connections are involved, and why we suggest it. You can weigh our proposal against other options at your own pace, and nothing is scheduled until you approve the plan. Ask as many questions as you need, and we will answer them before work begins.

Request a Visit

Describe Your Home and Packaged System Goals

Use the contact form to tell us about your home, the heating and cooling you have now, the rooms that need more comfort, and the outdoor space you have available. Our technicians come to your home for the review, so there is nothing you need to bring to us. If you are still deciding, you can compare packaged system repair and maintenance, read the packaged systems overview, or review ducted heat pump options before you reach out.

How Installation Works

From First Call to a Running Packaged System

A packaged installation moves through five stages, and each stage depends on the decisions made before it. You will know what happens at every point, and you can pause at any step to ask questions.

  1. Sketch Your Heating and Cooling Needs

    The project begins with a conversation about your home and the reasons you are considering a packaged system. We learn what you need before we discuss equipment, because the right cabinet depends on the home, the site, and your priorities.

    • Ask about the reason for the project, such as aging equipment or a home that needs a different heating and cooling arrangement
    • Note which rooms run cold in winter or warm in summer, and how the household uses each space
    • Find out whether indoor equipment space is limited, which can make an outdoor cabinet a better fit
    • Gather nameplate details and service history for any equipment that will be replaced
    • Schedule the home review through the contact form on this page
  2. Survey the Pad or Roof Location

    Next, our team reviews the outdoor site where the cabinet will sit. The location affects airflow, drainage, service access, and the length of every connection, so this survey shapes the rest of the plan.

    • Check the ground or roof surface for level footing, drainage, and structural support
    • Measure the clearance needed around the cabinet for airflow and for technicians to reach panels
    • Note where the ductwork and utility connections will meet the cabinet
    • Look for overhead wires, trees, fences, or other obstructions that could limit placement
    • Discuss your preferred location and explain any spot that would not be recommended
  3. Plan the Ductwork, Gas, and Electrical Connections

    Connections are where a packaged installation most often needs careful planning. We review each one so the scope is complete before the crew begins.

    • Review the existing ductwork that will connect to the cabinet and identify any sections that need attention
    • Confirm the gas supply and connection requirements when the system uses gas heat
    • Check that the electrical service and disconnect match the equipment being installed
    • Identify the condensate drain route so water leaves the system safely
    • Put the connection scope in your proposal so you can review it before any work is scheduled
  4. Set the Cabinet and Make the Connections

    Once you approve the plan, the crew sets the cabinet and completes the connections in the order the site requires. The work follows the approved plan so the result matches what you reviewed.

    • Move the cabinet into position with equipment and a route suited to the site
    • Secure the cabinet on its pad or roof support and confirm it sits level
    • Connect the ductwork, condensate drain, and utility lines to the cabinet
    • Keep the work area clear and protect the surrounding ground, plants, and access paths
    • Check each connection against the approved plan before startup begins
  5. Start the System and Hand Off the Operation

    Startup is where the installation proves itself. We run both heating and cooling, check the results, and walk you through the system before we consider the project complete.

    • Start the system in cooling and heating modes to confirm both operate as planned
    • Check airflow at supply registers and confirm that the condensate drain carries water away
    • Review the thermostat, the controls, and the filter location with you in the home
    • Explain the normal sounds you should expect and the signs that suggest the system needs attention
    • Discuss how seasonal tune-ups and our maintenance plan fit the care your new system needs

Common Questions

Packaged System Installation Questions, Answered

Our Services

Complete HVAC Services in Lenox and Nearby Communities

From the first warm day of summer to the coldest stretch of a Michigan winter, your home depends on equipment that works. As a full-service HVAC contractor, we install, repair, and maintain the systems that heat, cool, and supply hot water to homes across Lenox — plus the generators that keep everything running when the power goes out.

Furnace with an air cleaner and humidifier installed on the ductwork

Indoor Air Quality

Filtration, air purification, ventilation, UV treatment, and humidity control.

Customer Reviews

Read Reviews on Google (opens in a new tab)

What Our Customers Say

Our neighbors' feedback means everything to us. Read what homeowners across the area have to say about working with Degree Heating and Cooling.

Local Coverage

Packaged System Installation Near Lenox

We are based in Lenox and install packaged systems for homeowners in the communities below. Our service area overview explains how we cover the region, and each community has its own local page.

Don't See Your Location?

Don't see your town listed? We also help homeowners in neighboring communities around Lenox. Give us a call and we'll let you know if we can reach you.

Map of the service area around Lenox, Michigan, with pins on Lenox, New Haven, Macomb, Chesterfield, New Baltimore and Ira
  • Honest, Transparent Service
  • BBB Accredited
  • Locally Owned & Operated
  • AirEase & Samsung Systems
  • Flexible HVAC Financing

Next Steps

Plan Your Packaged System With a Lenox Contractor

A packaged system is a long-term part of how your home stays comfortable, so the installation plan matters as much as the equipment itself. We want you to understand each decision before you commit, whether you are replacing an aging system or considering a first packaged cabinet for a home with limited indoor equipment space. Our locally owned business and BBB Accreditation shape how we approach every visit, and we aim for clear, honest answers at each step of the project. From the first conversation through startup, you should always know what is being done to your home and why.

If a new installation is the right path, our financing options can help you plan the investment over time. Homeowners who want steady attention for their comfort system can also review our maintenance plan for ongoing care.

Tell us about your home, the heating and cooling you use now, and what you hope to change, and our team will confirm the next step with you. A short conversation helps us understand what your property needs before we recommend anything, and it gives you a chance to ask about placement, connections, and the options we would consider. We serve Lenox and the communities around it, and we are glad to talk through the details whether your project is large or small.

Cleaning the coil of a residential packaged unit with a hose
Call Schedule Service